Hvorfor PRUSAMENT?
PRUSAMENT PETG er produceret i Europa og har højeste standard for rundhed og ensartet størrelse hele vejen igennem, hvilket er meget vigtigt når man kører store 3D print. (over 2 timer)
PRUSAMENT er en af de bedste filament brands der er på markedet, det er de fordi producere et filament der har:
- Produktionspræcision på +- 0,02mm (normalen ligger på +-0,05mm)
- Høj densitet og stærkt materiale
- Stor kvalitetssikring i produktion
- Enorm ensartethed i hver eneste filament rulle
- Sporbarhed med QR kode på hver eneste rulle
Specfikationer:
- Materiale: PETG V0
- Diameter: 1.75 mm
- Præcision: ± 0.02 mm
- Heated build platform: 70°C – 90°C
- Print temperatur: 240°C – 250°C
- Vægt filament: 1000 g
Hvordan er rullerne pakket?
Alle PRUSAMEN PETG er pakket med 1 kg. og hele rullen vejer ca. 1,4 kg. inklusiv spolen, der indeholder genbrugspap for at reducere plast forbruget. Alle ruller er vakuum pakket med silica gel for at undgå fugt, som kan være problematisk for filamenter generelt.[/vc_column_text][/vc_column][/vc_row]
Her kan du sammenligne PETG med andre filament typer:
What is PETG?
PETG is a very tough material with good thermal resistance. Its use is universal but especially suitable for mechanical parts and both indoor and outdoor use. PETG has almost no warping, so printing large objects isn’t a problem. Prusa use it to print parts for our printers!
PETG is one of our favorite materials for 3D printing. It’s almost as easy to print as PLA, but it can offer many mechanical properties that PLA prints just cannot achieve. The G in the acronym PETG stands for Glycol which is added during the manufacturing process. Glycol modifies the properties of PET, so that it’s easier to print, less brittle and clearer when printing with semi-transparent variants. PETG has low thermal expansion, so even when printing big objects, and without an enclosure, it rarely lifts from the bed and warps. In addition to that, the filament is ductile. It has a healthy amount of flex which can prevent parts from breaking under pressure.
PRINT PREPARATION
This filament needs to be kept as dry as possible as it’s more hygroscopic, compared to regular PETG. If you can’t keep the filament dry, we suggest drying it before use for 6 hours at 55 °C.
Powder-coated Satin or TXT sheet provides good adhesion. Clean it with IPA (available in drugstores, for example) which works great not only with Prusament PETG V0 but with other materials too.
Pour a small amount of IPA on a paper towel and use it for cleaning the surface. To achieve the best results, clean the surface while it’s cold. Keep in mind that higher temperatures will evaporate the alcohol before cleaning the surface. Also, don’t forget that the heatbed preheated for printing Prusament PETG V0 has a high temperature (80 °C) and may burn you if you touch it! Another possibility is cleaning the surface with warm water and a few drops of dish cleaner on a paper towel. You can also use denatured alcohol.
We don’t recommend printing with Prusament PETG V0 on a smooth PEI sheet. This material adheres strongly to the PEI surface and may cause damage to it. This type of damage is not covered by the warranty. If you need to print on a smooth surface, spread a thin layer of paper glue stick on it.
