HT-PLA Light Grey fra ADD North

Name: HT-PLA Light Grey fra ADD North
SKU: 13731
Availability: InStock

335,00 kr. Inkl. moms

268,00 kr. ekskl. moms

HT-PLA har disse gode egenskaber:

Nem at printe med
7 forskellige farver.
Modstandsdygtig over for høj varme
Diameter : 1.75mm
750g spole

Varenummer (SKU): 13731 Kategorier: Alle produkter, Filament Tags: addnorth, e-pla, lightgrey, PLA

Beskrivelse
Yderligere information

HT-PLA

Add North’s HT-PLA er lavet af en ny modificeret udgave af PLA. Der giver plast tråden større slagstyrke og varmebestandighed end almindelig PLA, men er stadig lige så let at printe med.

Takket være den unikke krystallisering af dette nye HT PLA-materiale kan du ved hjælp af annealing efter endt print, kan du få ekstra varmebestandighed samt holdbarhed til endnu stærkere dele.

Velegnet til dimensionelt krævende og hårde funktionelle prototyper, der skal modstå høje temperaturer.

Annealing anbefalinger: 110C i 20-30 minutter er normalt nok, og vil give din del en temperatur modstand på 90C + og en langt stærkere laglimning.

Add North’s HT-PLA, sammen med alle vores andre filamenter, er lavet i Sverige og har en diameter tolerance på ±0.025mm.[vc_tta_tour][vc_tta_section title=”Filament Oversigt” tab_id=”1626336635217-3a05f553-a7399bab-5025″]Materiale egenskaber:Visuelle egenskaber:[vc_single_image image=”13733″ img_size=”full” alignment=”center” onclick=”zoom”][/vc_tta_section][vc_tta_section title=”Specifikationer” tab_id=”1626336637453-dc529c86-16639bab-5025″]Diameter tolerance±0.025mm[vc_column_inner][vc_separator]Spool size140 x 54 x 44 mm (100 – 250 g)
200 x 52 x 55 mm (500 – 1000 g)
200 x 52 x 66 mm (1000 g Economy lines)
300 x 52 x 102 mm (1500 – 2300 g)
350 x 52 x 100 mm (5000g)[vc_separator]Weight filament750g

[vc_separator]Weight empty spool110 g (100 – 250 g)
215 g (500 – 1000 g)
235 g (1000 g Economy lines)
545 g (1500 – 2300 g)
785 g (5000g)[vc_separator]UV resistanceMedium[vc_separator]Density1.23-1.25[vc_separator]Working temperature60°C (90-100°C when baked in oven)[vc_separator]Silicone freeYes[vc_separator]Chemical resistanceMedium[vc_separator]

Wear resistance

Medium[vc_separator]Print temperature200-230 °C[vc_separator]BiobasedYes[vc_separator]Bed temperatureNo (or up to 60 °C)[vc_separator]ROHSYes[vc_separator]REACHYes[vc_separator]HygroscopyMedium[/vc_tta_section][vc_tta_section title=”Filer” tab_id=”1626339548463-d83cfe19-ea8b9bab-5025″]

Technical Data Sheet

[vc_btn title=”Download” link=”url:https%3A%2F%2Fstorage.googleapis.com%2Faddnorth-com-public%2Ffiles%2FHTPLA_TDS.pdf”][/vc_tta_section][/vc_tta_tour]

Her finder du hjælp og inspiration til dine print indstillinger!

Disse print indstillinger er, baseret på Add:north resultater i deres kvalitetslaboratorium. Hver enkelt printer er dog unik, så vi kan ikke garantere, at disse indstillinger fungerer fejlfrit på alle printere derude. Derfor skal du se disse parametre som et sted at starte. (Dette er ikke en facitliste). Husk, at du altid kan skrive til info@kidsprint.com, hvis du støder på fejl eller har andre spørgsmål.

Held og lykke og happy printning![vc_tta_tabs gap=”3″ alignment=”center” active_section=””][vc_tta_section title=”Cura” tab_id=”1626339975428-63c0cb65-ecc79bab-5025″]

Drying table

Temp (°C)	55
Time (h)	2-4

Instructions

To be able to modify the settings below, select ‘custom’ as your print setup and click on the cog-wheels in the topic rows and enable the desired settings to make them modifiable

Load with built-in material profile (Cura)

PLA

Settings

Quality

Layer height	0.15
Initial layer height	0.2
Line width	0.35
Initial layer line width	1.1

Shell

Wall thickness	1.2
Top Thickness	0.6
Bottom Thickness (4 layers)	0.6
Compensate wall overlaps	Yes
Fill gaps between walls	Everywhere
Seam corner preference	Hide seam

Material

Printing temperature (+-5°C, depending on setup)	220
Printing temperature initial layer	225
Build plate temperature	60
Build plate temperature initial layer	60
Flow	95
Retraction distance (direct drive)	0.8mm
Retraction distance (bowden)	5.5mm
Retraction speed (mm/s)	35

Speed

Print speed	70mm/s
Wall speed	50mm/s
Outer wall speed	35mm/s
Initial layer speed	20mm/s

Travel

Combing Mode	All
Retract before outer wall	No
Z Hop when retracted	No

Cooling

Fan speed	100
Initial fan speed	0
Regular fan speed at layer	2
Minimum layer time	5

Build plate adhesion

Build plate adhesion type	Brim
Brim width	4mm

Recommended printer upgrades

Special nozzle	None
Extra bed adhesion	None

[/vc_tta_section][vc_tta_section title=”Simplify3D” tab_id=”1626339975447-79ca0040-245b9bab-5025″]

Drying table

Temp (°C)	55
Time (h)	2-4

Settings

Extruder

Extrusion multiplier	0.99
Extrusion width	0.4

Retraction settings

Retraction distance (direct drive)	1.4mm
Retraction distance (bowden)	6.0mm
Retraction Vertical Lift	0.3mm
Retraction Speed	35mm/s
Wipe Distance	2.0mm

Layer

Primary layer height	0.15mm
Top solid layers	3
Bottom solid layers	3
Outline/Perimeter Shells	3
First Layer Height	1.25
First Layer Width	1.1
First Layer Speed	0.3

Additions

Skirt layers	1
Skirt offset	0
Brim/skirt Outlines	8

Temperature settings

Primary extruder temp layer 1	225
Primary extruder temp layer 2+	220
Heated bed temp layer 1	60
Heated bed temp layer 2+	60

Cooling

Fan speed layer 1	0
Fan speed layer 2+	1

Speeds

Default printing speed	70mm/s
Outline Underspeed	0.5
Adjust printing speed, layers below 10s	Yes
Allow speed reductions down to	0.3

Other

Unsupported Area Threshold	50
Extra inflation distance	0
Bridging extrusion multiplier	100
Bridging speed multiplier	100

Advanced

Only retract when crossing open spaces	Yes
Force retraction between layers	No
Minimum travel for retraction	3mm
Perform retraction during wipe movement	Yes
Only wipe extruder for outer-most perimeters	Yes
Avoid crossing outline for travel movements	Yes
Maximum allowed detour factor	3