Original Prusa mini+ har blandet andet:
- Byggevolumen 180mm x 180mm x 180mm
- 32-Bit Buddy board (WIFI compatible)
- Mesh Bed Calibration (automatisk kalibrering af byggeplade på hvert print)
- Farve LED skærm
- Ethernet RJ45 port
- 3 Kvalitets termostater til temperatur styring
- Fleksibelt Spring Steel Sheet med PEI overflade til god vedhæftning under print og let fjernelse af Print når færdigt.
- Gearet extruder der skubber filamentet igennem en PTFE tube, med høj kvalitet. Dermed mindskes vægten på hotend når Extruderen ikke sidder der.
- Objekt preview på 3D printerens egen touch screen.
Der er 14 dages returret ved uåbnet produkt og dansk garanti på ikke sliddele.Denne 3Dprinter er et samle-selv sæt
Det tager ca. 10-14 timer at samle. Vi anbefaler at denne samlevejledning følges fra start til slut. vejledningen til Original Prusa mini+ kit kan findes her.[vc_video link=”https://youtu.be/ipulB4_Xdm8″ align=”center”][vc_separator]
Hvad er forskellen på en Original Prusa mini+ og en Original Prusa i3 MK3S+ ?
Specifications
Original Prusa MINI+
Original Prusa i3 MK3S+
| Build volume |
| Layer height |
| Max travel speed |
| Max hotend/heatbed temp. |
| Mainboard
|
| MMU2S support |
| Extruder |
| LCD screen |
| Print surface
|
| Filament diameter |
| Nozzle diameter
|
| Supported materials
|
| Filament sensor |
| Power panic |
| Ethernet connection |
| Wi-Fi connection |
| Advanced sensors |
| Farm mode |
| Calibration |
| Print medium |
| Firmware update interface |
| Power supply
|
| 18 x 18 x 18 cm | 7 x 7 x 7 in |
| 0.05 – 0.35 mm |
| 200+ mm/s |
| 280 °C / 100 °C (536 °F / 212 °F) |
| Custom 32-bit Buddy electronics with STM32 and latest Trinamic 2209 silent stepper drivers |
| No |
| Bowden system with 3:1 gearing |
| 2.8″ graphic 65k color screen |
| magnetic heatbed with removable PEI spring steel sheets |
| 1.75mm |
| 0.4mm (default) / other nozzle diameters supported |
| PLA, PETG, ASA, ABS, Flex
|
| Optional upgrade |
| Future software upgrade, single layer accuracy |
| Yes |
| Optional upgrade |
| 3 thermistors, fan RPM sensors |
| Yes (upcoming feature) |
| Automatic, Mesh Bed Leveling |
| USB drive / LAN |
| USB drive / LAN |
| 160W, external adapter by Mean Well or Delta depending on the region |
| 25 x 21 x 20 cm | 9.84 x 8.3 x 8 |
| 0.05 – 0.35 mm |
| 200+ mm/s |
| 300 °C / 120 °C (572 °F / 248 °F) |
| Einsy RAMBo 8-bit board with Trinamic 2130 drivers co-developed with Ultimachine |
| Yes |
| Direct drive |
| Monochromatic LCD |
| magnetic heatbed with removable PEI spring steel sheets |
| 1.75mm |
| 0.4mm (default) / other nozzle diameters supported |
| Any thermoplastic including Nylon and Polycarbonate |
| Yes (IR) |
| Hardware-based, single G-code line accuracy |
| Via Raspberry Pi |
| Via Raspberry Pi |
| 4 thermistors, fan RPM sensors |
| No |
| Automatic, Mesh Bed Leveling |
| SD card |
| USB port |
| 240W, custom made by Delta with Power Panic HW |
